List Price : $259.99 Price : $73.99
Product Description
This is our best selling swivel tv mount, and for good reason. It offers extreme versatility with a maximum extension of 20.3 inches from the wall. It's dual arm design is incredibly sturdy, and supports Panasonic plasma and LCD flat screen televisions.
Is this the mount for me?
* Do you prefer the look and feel of the dual arm design, and appreciate its incredible sturdiness?
* Does a 20 inch wall extension meet your installation needs?
Will this mount fit my Panasonic TV?
* This mount works with 99% of Panasonic TVs on the market. For 100% certainty, however, please refer to the Compatibility Checklist below.
Compatibility Checklist
* Mounting holes on television should be less than 770mm (30.3 inches) apart horizontally and 480mm (18.8 inches) vertically.
* Maximum weight capacity: 175lbs.
Product Dimensions
* Wall plate: 500mm width by 278mm height.
* Box dimensions: 20.8 inch x 13.8 inches x 2.5 inches
* Product weight: 14.0kg
Range of Motion
* Tilt: +- 15 degrees up and down and any angle in between.
* Swivel: 60 degrees in both directions
* Extension from wall: anywhere from 4.5 inches to 20.3 inches.
Design & Construction
* Solid toughened steel construction
* Durable scratch resistant finish.
* Easy installation.
Included in Box
* Mount and all nuts, bolts and washers necessary for installation.
* Product manual
* Free 6ft HDMI Cable
- Free 6ft HDMI Cable Included!
- Continuous angle adjustment with glossy, black knobs.
- Security locking mechanism to prevent the TV from unlatching from wall
- Built in bubble level for your convenience.
- Works with 99% of all Panasonic TVs on the market
Panasonic Compatible Swivel TV Mount for 32~60" Plasma & LCD Reviews
Panasonic Compatible Swivel TV Mount for 32~60" Plasma & LCD Reviews
| 13 of 13 people found the following review helpful  Relatively quick and easy, and works great!, Amazon Verified Purchase This review is from: Panasonic Compatible Swivel TV Mount for 32~60" Plasma & LCD (Electronics) My wife and I just made our first foray into a 50" widescreen plasma, and decided to go the extra mile and wall mount it. I'm not that handy, but can handle easy projects.It turns out that mounting our tv on the wall was not hard at all. The instructions were clear, and the fact that the kit came with several different sets of bolts etc. depending on your tv helped a lot. It's also great that the kit came with masonry parts just in case we need to do that in the future. The hardest part was making sure we found the studs and that the mount was level. Overall it took under an hour to do it all, and we took our time. The mount itself is very sturdy, and my wife loves that she can swivel it towards the kitchen when she's cooking. 8 of 8 people found the following review helpful  Great fully mobile flat screen tv mount, By Amazon Verified Purchase This review is from: Panasonic Compatible Swivel TV Mount for 32~60" Plasma & LCD (Electronics) I needed a wall mount that would swivel in all directions and still be stable for my 32" Panasonic Viera. I got this yesterday & thought that due to it's inherent weight, it would be difficult to put up & hard to deal with... wrong! I marked the studs, drilled 4 holes, got my DeWalt driver out for the 4 lag bolts, put it over my shoulder and ran the bolts into place. Next four screws to the back of the TV, hung it immediately on the hooks, adjusted the set screws and I can tilt, swivel pull out, shove back the TV as easy as you could wish. I says it can handle up to 50" and I believe it. there are spacers for mounting a rounded back flat screen as well & as long as you get the bolts well embedded in the stud, it could easily handle a large plasma TV. The mounting strips for the TV back have holes aplenty to fit most any brand flat screen... Obviously I am very pleased with it & readily give it 5 stars! 8 of 9 people found the following review helpful Well Made, Great Value - room for minor improvement, By AB (CA United States) - See all my reviews Amazon Verified Purchase This review is from: Panasonic Compatible Swivel TV Mount for 32~60" Plasma & LCD (Electronics) I used this to mount a Panasonic 50" plasma (TC-P50S2) in Nov 2010.The mount arrived very quickly (to CA) and was undamaged. I had a little issues with the length of the screws provided that hold the brackets to the back of the TV. When I called Panasonic to check on the length of the screws to use, they recommended 15mm which were not included with the mount. After checking the depth of the holes in the back of the TV, I found that 20mm would be sufficient to hold the TV without being deep enough to touch any components inside the TV. So I bought 20mm bolts from H.Depot. The mount was very easy to fix to the wall and it easily holds the 50" plasma. The only issue that bothers me, is that there seems to be no provision for stopping lateral movement of the TV in the event of an earthquake. The two vertical screws that stop the TV coming foreward off the back plate certainly will not stop it moving sideways. I bought a set of two aluminium window anti-slide devices and fixed... Read more |
› See all 37 customer reviews...
0 comments:
Post a Comment